How to change the oil to "Goetze"

Hyundai Getz is a compact, maneuverable, unpretentious and reliable car that enjoys deserved love and popularity among motorists.
But in order for it to serve for a long time and without fail, the car must undergo every 15,000 km of maintenance, which must include the replacement of engine oil.
If for any reason it is impossible to carry out an oil change in a car at specialized service stations, then it is not recommended to postpone this procedure “for later”;
All that the Goetz owner will need is a properly selected engine oil, an oil filter, a set of wrenches, and possibly a jack if there is no garage with a viewing pit or an overpass.

The choice of oil and its consumption


Car manufacturers Hyundai Getz recommend using all-season oil, class SG or SH according to the classification of the American Petroleum Institute. The viscosity grade of the oil will depend on the expected ambient temperature, which is different for all regions of the Russian Federation.
The consumption of the oil to be replaced will depend on the chosen replacement scheme and the engine size of the car:
- without changing the oil filter, the oil consumption will be 2.8-3.0 liters;
- With the replacement of the oil filter oil consumption will be 3.3-3.8 liters.
When choosing a filter, preference should be given to original parts, rather than cheaper counterparts: the original filters most accurately meet the needs of both the engine and the properties of the oil.

Oil change technology


Changing the oil on the Goetze is carried out with a pre-heated engine - be careful when draining the oil, as it is very hot!
After turning off the engine and after waiting a while for the oil to drain into the sump, you can proceed to the replacement: if there is no inspection pit or trestle, the right front part of the car should be lifted with a jack.
Next, you must remove the oil filler cap, unscrew the nut and the drain plug of the oil pan, oil filter. Used oil should almost completely merge into a previously prepared container.
To remove the filter, you may need a special puller, unscrewing the drain plug is convenient to do with the spanner wrench on 17.

Reassembly


After draining the used oil, a new filter is installed, the nut is tightened. It is desirable to install a special gasket made of thin metal under the drain plug in the pan - it prevents the oil from leaking and prevents the thread from breaking when unscrewing.
After these manipulations, fresh oil is poured into the engine with parts - at intervals of 5-10 minutes to fill both the filter and the pan. The oil level and the need for its topping up are determined using a special dipstick.


Related news


Rose from the fabric
Bunny with a bow
Recommendations on the choice of grinders
How to clean the coat
How to gain weight quickly
How delicious to cook haddock fish
Yenny or Laurel: users can not hear the name on the audio recordings