Green Rhapsody Necklace

For the appearance of a sunny spring mood, it is not necessary to wait for spring and the sun, you can create it yourself. At any time of the year, in order to change your internal sensations, you need to surround yourself with pleasing things, and even better to decorate yourself with them. a burst of emotion through decoration. To do this, make a unique air necklace of the original design with your own resources. The necklace will consist of two parts that make up a single ensemble and are connected by a lock.
 Necklace Green Rhapsody
It will require:
Necklace Green Rhapsody
  • fine-nose pliers, round-nose pliers, side cutters (they are called pliers by people),
  • ruler,
  • polyester thread 22M, needle for beads, scissors,
  • small transparent colorless beads,
  • bright green small short glass beads,
  • colorless transparent beads 5 mm (64 pieces) and 8 mm (7 pieces),
  • 2 double connectingringlet,
  • 2 caps,
  • screw lock,
  • steel color chain, at least 10 cm long,
  • 2 pins ending in a loop.
Manufacturing Algorithm. 1. First we will collect the side of the necklace with two rows of beads. Let's call it “part 1.” To do this, we take green glass beads, 5-mm-size beads — 32 pieces, mylar threads, a needle for beads, scissors, and a connecting ring.
 Necklace Green Rhapsody
Using a ruler or an eye, we measure a thread with a length equal to two lengths of the intended length of the desired side plus 10-15 cm. The thread should be folded doubly. We fix the thread on the ringlet and use the bead needle to collect the thread with beads in the next order e: 3 pieces of glass (only at the very beginning once), 1 bead, 1 glass, and so on to the desired length. All threads of the necklace will start with 3 pieces of green glass. This is necessary so that the necklace looks neat and symmetrical. In the future, most of the glass beads will be inside the caps. The length of the thread before the beginning of the next stage will be approximately 23 cm. 2.We collect the thread further and instead of beads of 5 mm in size, we use 8 mm beads - 7 pcs. We don’t wear glass beads before the first one.
 Necklace Green Rhapsody
3. Then we place a string with beads in the form of a loop and pass it through the first bead of 8 mm. We continue to collect a string with beads of 5 mm each in the amount of 32 pieces.
 Green Rhapsody Necklace
4. Last we wear 3 pieces of green glass beads and fasten the thread on the ring.
 Necklace Green Rhapsody
5. For the next step, take the green glass beads, transparent beads, mylar threads, a needle for beads, a connecting ring.
 Necklace Green Rhapsody
We measure the thread twice as long as at least 40-45 cm and fix it on the ring. 6. We collect threads with beads. We start all the threads with three pieces of glass beads. There will be 9 pieces of thread 31-33 cm long. Each thread will have different sequence of beads and glass beads, namely: 1 glass beads: 1 bead, 1: 2, 1: 3, 1: 4, 1: 5, 2: 1, 3: 1, 4: 1, 5: 1.
 Necklace Green Rhapsody
7.We take the first part of the necklace, pin, cap, round nose pliers, nippers.
 Green Rhapsody Necklace
8. Expand the ring of the pin and put it on the connecting ring. If you have a special tool for opening connecting rings of this type, then it is better to use it for convenience. Also this prevents the deformation of the pin.
 Green Rhapsody Necklace
 Necklace Green Rhapsody
9. Put on a hat on the pin. Necklace of Green Rhapsody 10. We take the second part of the necklace, the pin, the cap, the round pliers and the pliers.  Green Rhapsody Necklace We perform the same operations as with the first pin, unclench its ring and put it on the connecting ring. Necklace of the Green rhapsody Wear a hat.
 Necklace Green I Rhapsody
11.With round pliers we bend the pin at an angle of about 90.
 Necklace Green Rhapsody
12. Using round pliers and thin pliers, we form a loop from the pin, while cutting off the excess part of the pin.
 Necklace Green Rhapsody
13. Repeat the previous steps with part 1.
 Necklace Green Rhapsody
If the caps do not closely adhere to the threads, carefully compress them with a fine-nose pliers. 14. We take the thin-nose pliers and the lock, unclench the ring on it and dress it in the loop of the pin. We close the loop.
Necklace of Green Rhapsody
15. Take another part of the necklace and chain. We open the loop of the pin, put it on the chain segment and close it with the help of fine-nose pliers.
 Necklace Green Rhapsody
16. Using the pliers, cut the chain to the desired length.
 Necklace Green Rhapsody
17.We connect the chain with the lock.
Necklace of Green Rhapsody
18. We pass the bead of the necklace through the ring of the part with the beads. The necklace is ready.
 Necklace Green Rhapsody
Necklace Green Rhapsody
The necklace turned out bright and the original, noticeable and uplifting mood. It will help to decorate any clothes and will give to the owner many pleasant minutes.

Related news


How to shorten the bolt correctly
Bookmarks for books
And our great-grandmothers in the field gave birth, or is it worth giving birth at home
Autumn crafts: how to make a tree of leaves
29 wedding dresses for which it is worth playing a wedding